Jaylor Heavy Duty Mixers
It is widely known that using a TMR mixer is helpful to your operation for several reasons. Traditional methods of using a round bale feeder can lead to waste of up to 30%. Conservative estimates of switching to a TMR also put feed savings at 10-15%. You can increase your cow-calf profits, increase milk production, save money by reducing waste, and create a healthier livestock herd, thus increasing your income.
Jaylor TMR mixers are known for their square cut auger that provides higher quality mix, faster speeds and using 20% less horsepower.
Jaylor mixers provide mix uniformity so your livestock cannot sort, leading to better nutrition. With Jaylor’s processing knives, over 14 configurations of discharge for fast, even unloading and fast speeds, farmers have seen great success with Jaylor mixers. There is a mixer for any size operation you might have from smaller producers to large operations.
Jaylor TMR mixers are known for their square cut auger that provides higher quality mix, faster speeds and using 20% less horsepower.
Jaylor mixers provide mix uniformity so your livestock cannot sort, leading to better nutrition. With Jaylor’s processing knives, over 14 configurations of discharge for fast, even unloading and fast speeds, farmers have seen great success with Jaylor mixers. There is a mixer for any size operation you might have from smaller producers to large operations.
SPECS | 5750HD | 5850HD | 51000HD | 51250HD |
---|---|---|---|---|
CAPACITY NO EXTENSION | N/A | 800 ft³ | 22.7 m³ | 925 ft³ | 26.2 m³ | 1125 ft³ | 31.9 m³ |
CAPACITY 8" EXTENSION | N/A | 865 ft³ | 24.5 m³ | 990 ft³ | 28.0 m³ | 1190 ft³ | 33.7 m³ |
CAPACITY 12" EXTENSION | 740 ft³ | 21.0 m³ | 910 ft³ | 25.8 m³ | 1045 ft³ | 29.6 m³ | 1245 ft³ | 35.3 m³ |
CAPACITY 16" EXTENSION | 780 ft³ | 22.1 m³ | 960 ft³ | 27.2 m³ | 1095 ft³ | 31.0 m³ | 1295 ft³ | 36.7 m³ |
WEIGHT | 15500 lbs | 7000 kg | 17650 lbs | 8000 kg | 19800 lbs | 9000 kg | 23100 lbs | 10500 kg |
HEIGHT | 120 in | 305 cm | 116 in | 295 cm | 117 in | 297 cm | 135 in | 343 cm |
LENGTH | 291 in | 737 cm | 301 in | 765 cm | 318 in | 807 cm | 380 in | 965 cm |
DRUM WIDTH | 91 in | 231 cm | 97 in | 246 cm | 100 in | 259 cm | 102 in | 259 cm |
PTO SPEED | 480 RPM | 480 RPM | 480 RPM | 480 RPM |
MINIMUM HP REQUIREMENTS | 125 HP | 135 HP | 155 HP | 200 HP |
AUGER SPEED | 38 RPM | 38 RPM | 38 RPM | 41 RPM |
NUMBER OF KNIVES | 14 | 18 | 22 | 26 |
AUGER FLIGHTING THICKNESS | 3/4 in | 19 mm | 3/4 in | 19 mm | 3/4 in | 19 mm | 3/4 in | 19 mm |
MAX DISCHARGE HEIGHT* | 86 in | 218 cm | 86 in | 218 cm | 86 in | 218 cm | 86 in | 218 cm |
CONVEYOR WIDTH | 42 in | 107 cm | 42 in | 107 cm | 42 in | 107 cm | 42 in | 107 cm |
DOOR OPENING WIDTH | 34 in | 91 cm | 36 in | 91 cm | 39 in | 91 cm | 39 in | 91 cm |
FLOOR THICKNESS | 1/2 in | 13 mm | 1/2 in | 13 mm | 1/2 in | 13 mm | 1/2 in | 13 mm |
DRUM WALL THICKNESS | 1/4 in | 6 mm | 1/4 in | 6 mm | 1/4 in | 6 mm | 1/4 in | 6 mm |
STANDARD TIRES | 445/50R22.5 (4) | 445/50R22.5 (4) | 275/70R22.5 (8) | 275/70R22.5 (8) |
WHEEL ASSEMBLY | Walking Beam | Walking Beam | Walking Beam | Walking Beam |